Thermoforming & Membrane Presses
"RASA" Model : Solo - 9951 (8'-3” x 4'-3” Platen Size)
For Thermoforming & Membrane Pressing PVC, PP Film, Polystyrene, Kydex, Acrylics, Heat Transfer Foils, Wood Veneer, Paper and other Solid Surface materials over low cost substrates Such as edge-glued Panel stock, MDF, Partical Board or even non-wood products.
Hot Pressing for Laminates such as Sunmica (Formica) & Veneers can also be done With our Membrane machines using regular PVA (Fevicol) glue in 3-½ minute cycle.
Typical Application
- Thermoforming PVC and other foils over MDF panels - for Cabinets, Kitchen Cabinet Shutters and Drawer fronts, Room & Entry Doors etc...
- Veneer Cabinet Doors, Entry Doors and Table Tops
- Laminated Architectural Panels
- Bent Laminated Furniture parts
- Speaker Components.
- Automotive Parts
- Machine and aerospace components.
- RTA (Ready to Assemble) Furniture.
Specifications
Model
Solo - 9951
Flip Top - 9951
Platen Size (mm)
2515 x 12451295
2440 x 1220
Maxm. Part Size
2280 x 1060
2440 x 1220
Maximum Part Height
65 mm
65 mm
Dimensions
5600 x 1430
6000 x 1550
Cycle Time
2 Minutes
2 Minutes
Power Required
20 Kw.
20 Kw.
- High Stretch Silicone Rubber Membrane included with each machine.
- Above Machines can be converted to double platen type ("Duo") Machines in future if required.
* specifications subject to change without notice.
Advantages of "RASA" Membrane Press :
- Membrane-less operation when pressing PVC film.
- Short Cycle time of 2 minutes for high capacities.
- Direct heating system resulting in lower energy cost and higher surface definition.
- Ease of operation with minimum maintenance.
- Adjusts to membrane / membrane-less mode within minutes.
- Price Advantage with high reliability (Mfgd. under USA technical knowhow with all critical components imported from USA and Germany).
